Instrument Cluster / Carrier: Service and Repair

WM 900319 Removing and installing dashboard insert

Technical values





Preliminary work

Preliminary work for the dashboard insert

1. Remove instrument cluster. -> 902519 Removing and installing instrument cluster - section on "Removing"

Removing dashboard insert

1. Adjust the steering wheel as far down and as far back as it will go (as seen from the direction of travel)





Removing dashboard insert

2. Unclip both ends of the ornamental strip to the left and right
3. Unfasten securing screws -1- and -2-.
4. Push down the dashboard insert out of the dashboard mounting from the top using a plastic trowel.





Pull out the dashboard insert

Installing dashboard insert

1. Position the dashboard insert in the dashboard mounting and use the fastening screws -1- => 4,2X13-C: 1 ftlb and -2- => 4,2X13-C: 1 ftlb to screw it firmly into place.





Installing dashboard insert

2. Clip in both the end caps for the ornamental strip.

Subsequent work

Subsequent work for the dashboard insert

1. Install instrument cluster. -> 902519 Removing and installing instrument cluster - section on "Installing"