216655 Replacing Actuating Rod For Turbocharger Electronic Adjuster

WM 216655 Replacing actuating rod for turbocharger electronic adjuster

Removing actuating rod for turbocharger electronic adjuster

DANGER

Vehicle can fall down

- Risk of squashing or crushing
- Risk of damage to the vehicle

-> Do not place any solid objects under the raised vehicle.
-> Ensure that the lifting platform is prevented from lowering.
-> Remove solid objects before lowering the vehicle.
-> Raise the vehicle only at the take-up points provided.
-> The outer take-up points should be used primarily.

CAUTION

Hot components

- Risk of burns

-> Let hot components cool down.
-> Wear personal protective gear.

1. Unclip actuating rod at the ball joints for the electronic adjuster and turbocharger -arrows-.





Removing and installing actuating rod for turbocharger electronic adjuster

2. Clean the ball joints.

Installing actuating rod for turbocharger electronic adjuster

DANGER

Vehicle can fall down

- Risk of squashing or crushing
- Risk of damage to the vehicle

-> Do not place any solid objects under the raised vehicle.
-> Ensure that the lifting platform is prevented from lowering.
-> Remove solid objects before lowering the vehicle.
-> Raise the vehicle only at the take-up points provided.
-> The outer take-up points should be used primarily.

Information

- Replace the actuating rod for the adjustment mechanism after removing the electronic adjuster.

1. Clip on actuating rod at the ball joints for the electronic adjuster and turbocharger without grease -arrows-.





Removing and installing actuating rod for turbocharger electronic adjuster