744919 Removing and installing padding for 2/3-split folding rear seat

WM 744919 Removing and installing padding for 2/3-split folding rear seat

Removing padding for 2/3-split folding rear seat





2/3-split folding rear seat

Information

Fastening grommets on the locking mechanism for the padding on the seat frame will be damaged irreparably during removal. Always replace the fastening grommets during installation.

1. Pierce the fastening grommets -1- on the underside of the seat frame -2- with a screwdriver so that the locking mechanism no longer locks.





Loosening fastening grommets

2. Unclip the retaining eyelets -1- on the padding -2- with a strong upward jerk -arrows- at the front to remove them from the brackets -3-.





Removing padding for 2/3-split folding rear seat

3. Release the existing electric plug connections -1, 2- ( -a, b- ) and pull them off -A, B-.





Electric plug connections for 2/3-split folding rear seat

4. Remove the padding for the 2/3-split folding rear seat together with the wire harness.

Installing padding for 2/3-split folding rear seat

1. Plug in existing electric plug connections -1, 2- for the 2/3-split folding seat -A, B- and lock them -a, b-.





Installing electric plug connections for 2/3-split folding rear seat

Information

Fastening grommets on the locking mechanism for the padding on the seat frame will be damaged irreparably during removal. Always replace the fastening grommets during installation.

2. Fit new fastening grommets -3-.





Installing padding for 2/3-split folding rear seat

3. Position the padding -2- for the 2/3-split folding rear seat.
Check that the padding and the carpet inlay around the belt locks are seated correctly.
4. Clip in the retaining eyelets -1- on the padding -2- at the front by pressing them down firmly -arrows- into the fastening grommets -3-.
The retaining eyelets must engage securely in the fastening grommets.