905019 Removing and Installing Horn

WM 905019 Removing and installing horn

Technical values





Preliminary work

1. Remove front apron. -> 631519 Removing and installing front apron - section on "Removing"

Removing horn





Installation position of horn

NOTICE

Voltage peaks

- Risk of damage to load or to the control unit

-> Switch off ignition and remove remote control before disconnecting or removing load.

1. Release the electric plug connections -1- and unplug them -arrow A-.





Removing horn

2. Unscrew the fastening nuts -2- on the horns -3-.
3. Remove horns -arrow B-.

Installing horn

1. Position the horns and tighten the fastening nuts for the horn to => Tightening torque: 9 Nm (6.5 ftlb.).
2. Plug in electric plug connections until they engage securely.

Subsequent work

1. Install front apron. -> 631519 Removing and installing front apron - section on "Installing"