Crankshaft Position Sensor: Service and Repair

WM 287319 Removing and installing crankshaft pulse sender

Technical values





Preliminary work

1. Remove engine guard from the transmission. For details, see -> 108019 Removing and installing engine guard 108019 Removing and installing engine guard

Removing crankshaft pulse sender





Installation position of crankshaft pulse sender





1. Disconnect the electric connector for the crankshaft pulse sender.





Reference mark sender

2. Unscrew the fastening screw.
3. Carefully pull out the crankshaft pulse sender => Crankshaft pulse sender.





Crankshaft pulse sender

Installing crankshaft pulse sender

1. Insert the crankshaft pulse sender into the transmission block => Crankshaft pulse sender.





Crankshaft pulse sender

2. Tighten fastening screw -1- for the crankshaft pulse sender.





3. Connect cable plug of crankshaft pulse sender.

Subsequent work

1. Fit engine guard. For details, see -> 108019 Removing and installing engine guard 108019 Removing and installing engine guard