Setpoint Definitions

P170B

Setpoint definitions

NOTE: The specified values and value ranges correspond to the OK state in each case.

Line test setpoints
Short circuit to B+:
- Setpoint voltage - 0.5 V --> + 0.5 V

Short circuit to ground:
- Setpoint resistance > 0.9 MOhm

Open circuit:
- Setpoint resistance < 2 Ohm

NOTE: The specified values apply only at an ambient temperature of approx. 20 °C (68 °F) (room temperature).

Control unit setpoints
- Supply voltage for pressure sensor and displacement sensor 5 V
- Supply voltage for speed sensor 8.5 V