Removal and Replacement

WM 703019 Removing and installing front luggage compartment cover

Preliminary work

Remove luggage compartment light. -> 964019 Removing and installing luggage compartment light - "Removing" section 964019 Removing and installing luggage compartment light in rear lid

Removing front luggage compartment cover

Removing luggage compartment cover





Installation position of luggage compartment cover

1. Unscrew plastic nut -1- ( -Arrow A- ) and loosen luggage-compartment lining on the left-hand side -2- ( -Arrow B- ).





Loosening luggage-compartment lining

2. Unscrew fastening screws -1- from the luggage compartment cover -2-.





Loosening luggage compartment cover

3. Remove luggage compartment cover -1- to the front.





Removing luggage compartment cover

4. Check support -1- and replace if necessary.





Checking support

Removing luggage compartment cover





Installation position of luggage compartment cover

1. Unscrew plastic nut -1- ( -Arrow A- ) and loosen luggage-compartment lining on the left-hand side -2- ( -Arrow B- ).





Loosening luggage-compartment lining

2. Unscrew fastening screws -1- from the luggage compartment cover -2-.





Loosening luggage compartment cover

3. Remove luggage compartment cover -1- to the front.





Removing luggage compartment cover

4. Check support -1- and replace if necessary.





Checking support

Installing front luggage compartment cover

Installing luggage compartment cover

1. Position luggage compartment cover -1- in the luggage compartment.





Installing luggage compartment cover

2. Screw down luggage compartment cover -2- using the fastening screws -1-.





Fastening luggage compartment cover

3. Run in luggage-compartment lining -2- -arrow A- and fasten with the plastic nut -1- -arrow B-.





Fastening luggage compartment lining

4. Check to ensure that lid seal is installed correctly.

Installing luggage compartment cover

1. Position luggage compartment cover -1- in the luggage compartment.





Installing luggage compartment cover

2. Screw down luggage compartment cover -2- using the fastening screws -1-.





Loosening luggage compartment cover

3. Run in luggage-compartment lining -2- -arrow A- and fasten with the plastic nut -1- -arrow B-.





Fastening luggage compartment lining

4. Check to ensure that lid seal is installed correctly.

Subsequent work

Install luggage compartment light. -> 964019 Removing and installing luggage compartment light - "Installing" section 964019 Removing and installing luggage compartment light in rear lid