537919 Removing and Installing Balancing Weight for Rear Lid

WM 537919 Removing and installing balancing weight for rear lid

Technical values





Preliminary work

1. Remove trim panel for rear lid. -> 708719 Removing and installing trim panel for rear lid - section on "Removing" 708719 Removing and installing trim panel for rear lid

Removing balancing weight for rear lid

1. Unscrew fastening screws -1- and remove balancing weight -2- from the rear lid -3- ( -arrow- ).





Removing balancing weight

Installing balancing weight for rear lid

Removing and installing balancing weight for rear lid

Information

When screwing on the balancing weight for the rear lid, use an open-ended wrench on the buffer stops to prevent them from turning.

1. Coat fastening screws -1- with medium-strength screw locking agent.





Installing balancing weight

2. Position balancing weight -2- on the rear lid -3- ( -arrow- ) and secure with the fastening screws -1-. => Tightening torque: 9.7 Nm (7.5 ftlb.)

Subsequent work

1. Install trim panel for rear lid. -> 708719 Removing and installing trim panel for rear lid - section on "Installing" 708719 Removing and installing trim panel for rear lid