705819 Removing and installing trim strip for the instrument panel

WM 705819 Removing and installing trim strip for the instrument panel

Removing trim strip for the instrument panel

Removing trim strip for dashboard (on driver's side)





Installation position of trim strip for dashboard

1. Insert a plastic wedge between the dashboard and left trim strip -1- and unclip trim strip.





Removing left trim strip

2. Check clamp, replace if necessary.
3. Insert a plastic wedge between the dashboard and right trim strip -1- and unclip trim strip.





Removing right trim strip

4. Check clamp, replace if necessary.

Removing trim strip for dashboard (central locking switch)

1. Switch off ignition and remove ignition key.
2. Insert a plastic wedge between the dashboard and centre trim strip -1- and unclip trim strip.
3. Hold trim strip and remove the switch -2- by unlocking the locking lugs.





Removing centre trim strip

4. Check clamp, replace if necessary.

Removing trim strip for dashboard (cup holder)

1. Open the glove compartment.
2. Insert a screwdriver between the cup holder -2- and left/right trim strip -1- and unclip cover carefully in -direction of arrow-.





Installing left/right trim strip (cup holder)

3. Insert a screwdriver between the cup holder -2- and centre trim strip -1- and unclip cover carefully in -direction of arrow-.





Removing centre trim strip (cup holder)

Installing trim strip for the instrument panel

Installing trim strip for dashboard (cup holder)

1. Position centre trim strip -1- on the cup holder and press in until it clicks into place.





Installing centre trim strip (cup holder)

2. Position left/right trim strip -1- on the cup holder and press in until it clicks into place.





Installing left/right trim strip (cup holder)

3. Close glove compartment.

Installing trim strip for dashboard (central locking switch)

1. Press switch -2- into the trip strip until the locking lugs engage.





Install centre trim strip

2. Position trim strip -1- on the dashboard and press in until it clicks into place.

Installing trim strip for dashboard (on driver's side)

1. Position right trim strip -1- on the dashboard and press in until it clicks into place.





Installing right trim strip

2. Position left trim strip -1- on the dashboard and press in until it clicks into place.





Installing left trim strip