80321900 Removing and installing heat exchanger hose

WM 803219 Removing and installing heat exchanger hose

Tools





Preliminary work

Preliminary work for heat exchanger hose

Drain coolant. -> 193817 Draining and topping up with coolant - section on "Draining" Service and Repair

Remove battery cover. -> 271219 Removing and installing battery cover - section on "Removing" 27121900 Removing and installing battery cover

Removing the battery. -> 270619 Removing and installing battery - section on "Removing" 27061900 Removing and installing battery

Removing heat exchanger hose

1. Release the two top fastening clamps for the coolant hoses of the heat exchanger and slide them back over the hoses.





Disconnecting coolant hoses of heat exchanger

2. Remove the two bottom spring-band clamps using the assembly tool for spring-band clamps NR.72.

Installing heat exchanger hose

1. Push coolant hoses onto the heat exchanger and secure with the two fastening clamps.





Securing coolant hoses of heat exchanger

2. Fit the two bottom spring-band clamps using the assembly tool for spring-band clamps NR.72.

Subsequent work

Subsequent work for heat exchanger hose

Installing battery. -> 270619 Removing and installing battery - section on "Installing" 27061900 Removing and installing battery

Fill in coolant. -> 193817 Draining and topping up with coolant - section on "Topping up" Service and Repair

Install battery cover. -> 271219 Removing and installing battery cover - section on "Installing" 27121900 Removing and installing battery cover

Carry out work instruction after disconnecting the battery. -> 2706IN Work instructions after disconnecting battery External Power Connection, Jump Lead Starting