924119 Removing and installing wiper arm for rear window washer

WM 924119 Removing and installing wiper arm for rear window washer

Technical values





Removing wiper arm for rear window washer





Installation position shown on the 911

1. Pull cover -1- up and off.





Removing wiper arm

2. Unscrew the fastening nut -2-.
3. Press wiper arm -3- down at joint and pull down from the wiper motor drive.

Installing wiper arm for rear window washer

1. Position wiper arm -3- on the wiper motor drive and tighten the fastening nut -2- by hand.





Fitting wiper arm

2. Align wiper arm with the mark on the windscreen.





Aligning wiper arm

3. Screw on fastening nut -2- and push on the cover -1-. The cap must engage audibly.=> Tightening torque: 19 Nm (14 ftlb.)
4. Actuate wiper motor of the rear window washer system, allow it to come to rest and check the position of the wiper arm once more.