722619 Removing and installing cover for backrest
WM 722619 Removing and installing cover for backrest
Information
Installation position of backrest cover
Installation position of backrest cover
Removing cover for backrest
Preliminary work
1. Remove front seat.
-> 720119 Removing and installing front seat 720119 Removing and Installing Front Seat
Information
- The padding for the front backrest and the side airbag only need to be removed if the rear cover is removed.
- The padding for the front backrest and the side airbag do not need to be removed when removing the side cover.
2. Remove side airbag.
-> 696319 Removing and installing side airbag 696319 Removing and Installing Side Airbag
Information
- The padding for the front backrest and the side airbag only need to be removed if the rear cover is removed.
- The padding for the front backrest and the side airbag do not need to be removed when removing the side cover.
3. Remove padding for front backrest.
-> 741719 Removing and installing padding for front backrest 741755 Replacing padding for front backrest
4. Disconnect suction fan.
-> 741619 Suction fan for backrest surface 741619 Removing and installing suction fan for backrest surface
Only for seats with air conditioning, for removing the rear cover.
5. Remove control valves from the guide.
-> 723819 Removing and installing control valve for air cushion 723819 Removing and installing air cushion control valve
Only for seats with air cushions, for removing the rear cover.
Removing cover for inner backrest
1. Unscrew fastening screw -1- at the side from the cover -2-.
Removing fastening screw at the side
2. Unscrew fastening screw -1- at the bottom from the cover -2-.
Removing fastening screw at the bottom
Information
- The retaining clips will be damaged irreparably during removal.
- Always use new retaining clips during installation.
3. Remove the cover -1- together with the retaining clip -2-.
Removing cover
Removing cover for outer backrest
1. Press ring clip -1- at the side off the cover using a screwdriver.
Removing ring clip
2. Unscrew fastening screw -1- at the bottom from the cover -2-.
Removing fastening screw at the bottom
Information
- The retaining clips will be damaged irreparably during removal.
- Always use new retaining clips during installation.
3. Remove the cover -1- together with the retaining clip -2-.
Removing cover (inner side shown here)
Removing cover for rear backrest
1. Release locking lugs -1 and 2- ( -arrows- ) and detach cover.
Releasing locking lugs
2. Guide the cover -1- out on both sides over the bracket -2-.
Detaching cover at the sides
3. Unclip retaining clips -1- in the head area on both sides.
Unclipping retaining clips
4. Remove cover for backrest -1- to the rear.
Removing cover
Installing cover for backrest
Installing cover for inner backrest
Information
- The retaining clips will be damaged irreparably during removal.
- Always use new retaining clips during installation.
1. Fit and engage the cover -1- together with the retaining clip -2-.
Fitting cover
2. Screw in fastening screw -1- at the bottom of the cover -2-.
Fitting fastening screw at the bottom
3. Screw in fastening screw -1- at the side of the cover -2-.
Fitting fastening screw at the side
Installing cover for outer backrest
Information
- The retaining clips will be damaged irreparably during removal.
- Always use new retaining clips during installation.
1. Fit and engage the cover -1- together with the retaining clip -2-.
Fitting cover (inner side shown here)
2. Screw in fastening screw -1- at the bottom of the cover -2-.
Fitting fastening screw at the bottom
3. Fit a new ring clip -1-.
Fitting ring clip
Installing cover for rear backrest
1. Position cover for backrest -1- forward.
Fitting cover
2. Clip in retaining clips -1- in the head area on both sides.
Clipping in retaining clips
3. Guide the cover -1- into position over the bracket -2- on both sides.
Guiding in cover
4. Clip in locking lugs -1 and 2- on the cover in the lower backrest area.
Clipping in locking lugs
Subsequent work
1. Fit control valves in the guide.
-> 723819 Removing and installing control valve for air cushion 723819 Removing and installing air cushion control valve
Only for seats with air cushions, for installing the rear cover.
2. Plug in suction fan.
-> 741619 Suction fan for backrest surface 741619 Removing and installing suction fan for backrest surface
Only for seats with air conditioning, for installing the rear cover.
3. Install side airbag.
-> 696319 Removing and installing side airbag 696319 Removing and Installing Side Airbag
4. Install padding for front backrest.
-> 741719 Removing and installing padding for front backrest 741755 Replacing padding for front backrest
5. Install front seat.
-> 720119 Removing and installing front seat 720119 Removing and Installing Front Seat