Synchro Reverse Gear Not Disengageable

P177E

Diagnosis information - PDK

Synchro reverse gear not disengageable

Diagnostic conditions
The control unit initially tests internal function sequences when the ignition is switched on (terminal 15). If they are OK, all diagnosable outputs are then tested and any faults are stored.
- Ignition on
- The following faults are not detected: P1731, P1732, P1733 or P1734
- The following faults are not detected: P1706 or P1707
- Alternative measure HSS3_OFF not active

Possible fault causes
- Hydraulics faulty (hydraulic control unit)
- Transmission faulty

Fault setting conditions
- Reverse gear cannot be disengaged

Fault effects
- Gear held
- No gear preselection
- Transmission limp-home indication in instrument cluster control unit