P0336

P0336

Diagnosis information - Control unit DME (DFI)

Sensor Crankshaft

Diagnostic conditions
- Engine running
- then Driving with Overrun phase(s)
- only PDK:
- then engine stop, at:
- Start/stop system

- then Engine start, at:
- Start/stop system

Possible fault causes
- Starter battery discharged discharged, at:
- Ambient temperature low
- Loose contact or corrosion on connectors or lines
- Phase sensor wheel Faulty (damaged / bent bent)
- Sensor Crankshaft loose
- Sensor Crankshaft not installed or installed incorrectly
- Sensor Crankshaft Faulty

Fault setting condition(s)
- The crankshaft sensor detects too many or not enough tooth flanks on the sensor wheel. at:
- Engine start
- Engine running
- Overrun phase(s)