P0350

P0350

Diagnosis information - Control unit DME (DFI)

Power supply Bar ignition module

WARNING:
High voltage.
Death or severe injuries due to high voltage or high current.

- Start engine only if all the bar ignition modules have been installed and connected.

NOTE:
Sensitive electronics.
Risk of irreparable damage to electronic components.

- DO NOT perform electrical tests.
- DO NOT connect external power sources.
- Ground supply Check.

Diagnostic conditions
- Period since engine was started > 2 Second(s)
- Engine temperature > -30 °C (°F)

Possible fault causes
- Fuse Faulty
- Short circuit to ground or open circuit in lines (Power supply)

Fault setting condition(s)
- The fault is detected only if there is no voltage present at ALL bar ignition modules at contact 3