P0835

P0835

Diagnosis information - Control unit DME (DFI)

Clutch switch interlock

Diagnostic conditions
- at Engine start detected
and
- Clutch pedal fully depressed

or
- at Starter does not rotate
and
- Clutch pedal fully depressed:
- Ignition lock Position 2 (Terminal 50 - Engine start) > 3 Second(s)
- then:
- Ignition off
and
- Clutch pedal undo
- then:
- Clutch pedal fully depressed
and
- Ignition lock Position 2 (Terminal 50 - Engine start) > 3 Second(s)

Possible fault causes
- Short circuit to B+ or Open circuit Signal lead
- Clutch switch interlock Faulty (stuck open)

Fault setting condition(s)
- Ignition lock Position 2 (Terminal 50 - Engine start) > 6 Second(s) total (See Diagnostic conditions)

Fault effects
- Starter does not rotate
- Display [Clutch pedal actuate] (Instrument cluster)