519319 Removing and installing Cover For Centre Underbody

WM 519319 Removing and installing cover for centre underbody

Removing and installing tunnel cover

Removing tunnel cover

1. Unscrew fastening screws -1-.





Unscrewing fastening screws

2. Remove fastening nuts -2-.





Screwing off fastening nuts

3. Unscrew front fastening screws -1-.





Unscrewing front fastening screws

4. Remove tunnel cover.

Installing tunnel cover

1. Position tunnel cover.
2. Screw in fastening screws -1-.





Screwing in fastening screws

3. Tighten fastening nuts -2-.





Tightening fastening nuts

4. Screw in front fastening screws -1-.





Screwing in front fastening screws

Removing and installing right cover

Removing right cover

Information

Some of the repair illustrations show only one side of the vehicle. Naturally, some steps also have to be performed on the opposite side of the vehicle as well. These must be carried out as a mirror image of the steps shown.

1. Remove tunnel cover.
2. Remove fastening nuts -2-.





Screwing off fastening nuts

3. Remove fastening nuts -2-.





Screwing off fastening nuts

4. Unscrew front fastening nuts -2- and fastening screw -1- at door sill.





Unscrewing fastening nuts and screw

5. Unscrew centre fastening screw -1-
6. Unscrew rear fastening screws -1-.





Unscrewing rear fastening screws

7. Remove cover.

Installing right cover

1. Position the cover -A- and press it up -B-.





Positioning cover

2. Tighten fastening nuts -2-.





Tightening fastening nuts

3. Tighten fastening nuts -2-.





Tightening fastening nuts

4. Screw in fastening nuts at the front -2- and the fastening screw -1- for the door sill.





Screwing in fastening nuts and screw

5. Screw in front fastening screw -1-.
6. Screw in rear fastening screws -1-.





Screwing in fastening screws at the rear

7. Install tunnel cover.

Removing and installing left cover

Information

- The procedure for removing and installing the left cover is the same as for the right side.