519419 Removing and Installing Cover for Rear Underbody

WM 519419 Removing and installing cover for rear underbody

Removing cover for rear underbody

1. Unscrew fastening screws -1- for the right wheel housing liner.





Fastening screws for right wheel housing liner

2. Unscrew fastening screws -1- for the left wheel housing liner.





Fastening screws for left wheel housing liner

3. Unscrew fastening screws -1- for the rear skirt.





Fastening screws for rear skirt

4. Unscrew fastening screws -2- for the luggage compartment floor (plastic screws, coarse thread).





Fastening screws for luggage compartment floor

5. Unscrew centre fastening screw -1- for the heat protection panel.





Fastening screw for heat protection panel

6. Remove underbody panelling.

Installing cover for rear underbody

1. Position underbody panelling on the rear skirt -A-
2. Lift up underbody panelling. -B-





Positioning rear underbody panelling

3. Screw in centre fastening screw -1- for the heat protection panel.





Fastening screw for heat protection panel

4. Screw in fastening screws -2- for the luggage compartment floor (plastic screws, coarse thread).





Fastening screws for luggage compartment floor

5. Screw in fastening screws -1- for the rear skirt.





Fastening screws for rear skirt

6. Screw in fastening screws -1- for the left wheel housing liner.





Fastening screws for left wheel housing liner

7. Screw in fastening screws -1- for the right wheel housing liner.





Fastening screws for right wheel housing liner