Bosch LU Electronic Fuel Injection

1. Remove control unit from vehicle if it will be exposed to temperature of 175°F or higher.
2. Never start engine when battery connections are loose.
3. Never start engine when a battery fast charge is attached to battery.
4. Always disconnect battery terminals from battery when using a booster-charger to charge battery.
5. Never detach or attach wiring harness terminal plug to or from control unit when ignition switch is on.
6. Never start any diagnosis or repair of fuel injection system until ignition system has been completely checked.
7. Whenever using ohmmeter, make sure ignition switch is in ``Off'' position. Ohmmeter may be damaged if subjected to a live circuit.