Bumper Extension - Removal Procedure

83saab02

SUBJECT:
REPAIR PROCEDURE, M84 BUMPER EXTENSIONS

ISSUE: 12/83-656
FILE IN S.I. MANUAL:
VOLUME: I

SECTION: 8

PAGE: 73



The bumper extensions on M84 cars are attached with Phillips head screws. To gain access to these screws, the decorative bright strip must be removed. As shown by the diagram below, the strips may be easily removed with a wideblade screwdriver.

Press in the edge of the strip with a flat blade screwdriver, then lift, up the strip where it bows. Do not mar the decorative strip during removal.
NOTE: Warranty Flat Rate Operation is 86139 for .2 hours.