Trailer Hitch - Installation

89saab09

FILE IN VOL.
S.I. Man. I

SEC. PG.
A-9 78


Issue: 11/89-1192
Subject: Fixed Trailer Hitch Installation

Application: 900 87-
The fixed trailer hitch, P/N 0230391, is now approved for installation on 1987- 900 models. Previously only the removable trailer hitch could be used because of the rear bumper configuration on these cars. The following modifications to the rear bumper skin are necessary for a fixed hitch to be installed on 1987- 900 models.
Steps 1-6 should be performed before the trailer hitch is installed.


1. Remove the bumper.

Figure 1 - Support bracket.:

2. Remove the support bracket in the spare tire well which is anchored to the floorpan and the central reinforcing beam (Figure 1).

Figure 2 - Towing eyelet.:

3. Remove the towing eyelet from the rear body underpanel (Figure 2).

Figure 3 - Bumper Cover.:

4. Measure and mark 33 mm to the left and to the right of the existing centerline on the bumper cover (Figure 3).


5. Measure down from the crease, 12 mm for 3 door cars or 45 mm for 4 door cars and convertibles, as shown in Figure 3.


6. Cut out the marked area.


7. Mount the trailer hitch on the car as per the instructions in the kit.


8. Remount the bumper and check fit. Trim the bumper cover If necessary.