Hydraulic Hoses, Removal/Fitting

Hydraulic hoses

To remove




1. Remove the hydraulic system from the car. Service and Repair
2. Note and mark the position of the hoses and then disconnect them from the cylinder and pump.

When replacing the RH set of hoses, the bypass valve must be transferred from the old to the new set.


To fit





1. Reconnect the hoses to their respective fittings on the pump and cylinder. Tightening torque: 5.1 - 6.2 Nm (3.8 - 4.5 ft lb).
2. Reinstall the hydraulic system in the car. Service and Repair