675B1

Fault Code 675B1





Malfunction indicated
Calibration impossible.

Fault symptom
TCS CTRL lamp on.

Test procedure

1 Check that the engine runs satisfactorily and warm it up to normal operating temperature.If the car has been parked outdoors in extremely cold weather, bear in mind that it will take a fairly long time for the motor oil to become warm.

2 Enter ISAT command code 208.
Rev the engine up to 3000 rpm and wait for it to stabilize at this speed. The safety switch should then be OFF and the ISAT should show 8B008.
If the switch is ON or goes to ON (ON = N8B108 on the SAT) while engine speed is maintained at 3000 rpm, the safety switch is faulty and a new throttle housing must be fitted.