Saab Car Computer (SCC) Trip Computer

SCC Trip Computer:

SCC Trip Computer:

The SCC trip computer (Saab Car Computer) has the following functions: (left-hand side <)

^ DIST. TO DEST. (distance to destination).
^ AVER. SPEED (average speed).
^ SPEED WARN. (speed warning)
(right-hand side >)
^ CLOCK (clock function).
^ ARRIVAL (arrival time).
^ ALARM (alarm function).

The trip computer is operated by means of the buttons situated below the display.

Presentation in kilometers or miles can also be selected with these buttons.

SCC Trip Computer:

The bottom row on the trip computer includes a light sensor and two buttons. The light sensor is used for automatic control of display brightness on the SCC and EDU trip computer in daylight.

The brightness of the button illumination is controlled by rheostat 16 (lighting for controls) on the dashboard.

R and INFO are used for the EDU trip computer. These, together with the light sensor, are connected to trip computer EDU 210 via an 8-pin connector.

SCC trip computer 241 is supplied with current from fuse 19 continuously and also from fuse 13 when the ignition switch is in the Drive position.

To process and display the information for the different functions, the trip computer requires information from vehicle speed sensor 132, terminal 2. The signal is obtained via the EDU.