Pictogram-Door Indication

'�5Pictogram - Door Indication:

WIRING DIAGRAM

Pictogram Door Indication:

COMPONENT LOCATION VIEW

Pictogram Door Indication: Component ID:

COMPONENT ID
47 Main instrument display panel in the dashboard.
56 Luggage compartment lighting switch in the tailgate.
175 Control module, central locking system, on a bracket under the dashboard on the left-hand side.
208 Door lock indication, in the locking mechanism inside each door.
213 Pictogram, in the main instrument display panel.
331 SRS control module, in the front part of the centre console under the dashboard.

2-Pin Connectors
H2-16 Beside the locking mechanism inside the right-hand front door.
H2-28 Beside the locking mechanism inside the right-hand rear door.
H2-34 Beside the locking mechanism inside the left-hand front door.
H2-38 Beside the locking mechanism inside the left-hand rear door.
H2-62 In the tailgate on the left-hand side.

6-Pin Connectors
H6-4 To the left in the tailgate beside the rear window.
H6-8 In the tailgate beside motor 188 (4D, CS).

8-Pin Connector
H8-4 By the left-hand rear wheel housing.

10-Pin Connectors
H10-22 In right-hand B pillar.
H10-24 In left-hand B pillar.

22-Pin Connectors
H22-1 Behind the cable entry in the left- hand A pillar.
H22-2 Behind the cable entry in the right- hand A pillar.

Grounding Points
G5 Grounding point, rear seat, under the left-hand part of the seat.
G6 Grounding point, negative distribution terminal, in main fuse box behind the glove box.
G8 Grounding point, dashboard, beside the front left-hand speaker socket.
G24 Grounding point, on the right-hand front seat member.

DESCRIPTION OF OPERATION
The part of pictogram 213 that covers door indication alerts the driver if any of the doors is not properly closed.

The filament monitor that is also covered by the pictogram is described in the previous section.

When the ignition switch is in the Drive position, positive current is supplied to terminal 5 of the pictogram and via lamps F, G, D, E and J for each door to the door switch in question.

If any door is not completely closed, door switch 208 will be closed and the circuit for the associated lamp is grounded, which means that the lamp lights up.

On right-hand drive cars, lead 587 is connected to pin 9 of the pictogram and lead 586 is connected to pin 10 of central locking system control module 175.

If the tailgate is not completely closed, luggage compartment switch 56 will be closed and lamp J light up.

FAULT DIAGNOSIS HINTS
Door indication is activated by turning the ignition switch to the Drive position.
1. Check that current is supplied to terminal 5 of pictogram 213.
2. Check that the deor switches are in proper working order.
3. Check that the luggage compartment lighting switch is in proper working order.
4. Check the connectors, wiring harness and ground connections.