Other Markets

J�XExtra Fog Lights, Other Markets:

WIRING DIAGRAMS

Extra Fog Lights: Components Locations:

COMPONENT LOCATION VIEW

Extra Fog Lights: Components ID:

COMPONENT ID

1 Battery in the engine bay.
10 Lights switch on dashboard between steering wheel and driver's door.
16 Rheostat, lighting for controls, on dashboard between the steering wheel and driver's door.
22A Fuse board behind the cover flap in the glove box.
75 Distribution block, battery positive, on the battery tray.
85 Extra fog lights in front spoiler.
88/88A Switch, extra fog lights, on dashboard between the steering wheel and driver's door.
107 Relay, extra fog lights, in main fuse box in front of the battery.
161 Switch, rear fog light, on dashboard between the steering wheel and driver's door.
342A Fuse board in main fuse box in front of battery.

10-Pin Connector
H10-15 Behind the left-hand headlamp.

24-Pin Connector
H24-2 Behind the left-hand headlamp.

Grounding Points
G8 Grounding point, dashboard, by the left-hand front loudspeaker socket.
G30 Grounding point, left-hand structural member behind the left-hand headlamp.
G31 Grounding point, right-hand structural member behind the right-hand headlamp.

DESCRIPTION OF OPERATION
Other Markets
The fog lights are wired so that they can be lit when the car's daylight driving lights, parking lights, full beam or dipped beam are on.

If light switch 10 is in position 0 (daylight driving lights), position 1 (parking lights) or position 2 (full or dipped beam), switch 88, connection 7, for extra fog lights receives positive voltage via pin 29. This also feeds the parking lights.

When switch 88A is depressed, relay 107 operates and the lamp built into the switch lights up at full intensity. When the switch is not activated, the lamp is supplied with current via rheostat 16 (lighting for controls).

When the relay is energized, both fog lights 85 receive current from fuse 12 via the closed relay contact.

On cars with extra fog lights and a rear fog light, the rear fog light is supplied with current via relay 107 and extra fog light switch 88 when the extra fog lights are switched on.

FAULT DIAGNOSIS HINTS
The extra fog lights are switched on by pressing switch 88.
1. Check that fuses 8,12 and 29 are intact and supplied with current.
2. Check that each fog light bulb is OK and supplied with current.
3. Check the grounding at the lamp.
4. Check the operation of relay 107, lights switch 10 and switch 88/88A by taking readings on their connections.
5. Check the wiring harness, connectors and ground connections.

US and CA Markets
Also check:
6. That the full beam bulbs are intact. (Relay 107 is grounded via the lamps.)
7. That fuse 8 is intact. If the fuse has blown, the fog lights will not go out when full beams are switched on.