Information Bus
- Application and ID
Description and Operation
Testing and Inspection- Initial Inspection and Diagnostic Overview
- Symptom Related Diagnostic Procedures
- Diagnostic Tool Screen Does Not Go on With ON Button Pressed
- EDC 15 Missing In Bus Configuration List
- No Communication With Auxiliary Heater
- No Communication With Motronic
- No Communication With TCM
- No Communication With the ABS
- No Communication With the Airbag (SRS)
- No Communication With the Trionic T5
- Fault Symptoms
- Quick Check
- Checking That the Trionic Control Module Is Active
- Checking Trionic Control Module Power Supply and Ground - I
- Checking Trionic Control Module Power Supply and Ground - II
- Checking the Diagnostic Tool
- Rectifying the Lead - I
- Rectifying the Lead - II
- Rectifying the Lead - III
- Check the Immobilizer Switch on the Main Instrument Unit
- Internal Control Module Fault
- Final Check
- Before Changing A Control Module
- No Contact With Any Bus System
- Fault Symptoms
- Quick Check
- Check DICE Control Module's Current Supply (+15 Circuit)
- Check DICE Control Module's Current Supply (+30 Circuit)
- Check That the DICE Control Module Is Awake
- Check That the DICE Control Module's Grounding
- Checking the Diagnostic Tool - I
- Checking the Diagnostic Tool - II
- Checking the DICE Control Module's Current Supply (+15 Circuit)
- Checking the DICE Control Module's Current Supply (+30 Circuit)
- Checking the DICE Control Module's Grounding
- Rectifying the Lead - I
- Rectifying the Lead - II
- Final Check
- Before Changing A Control Module
- The Diagnostic Tool Display "Missing" For One or More Systems
- Check DICE Can Communicate With A Bus-Connected Control Module
- Checking the I-Bus
- Diagnostic Procedure For the DICE Bus Wiring Harness - I
- Diagnostic Procedure For the DICE Bus Wiring Harness - II
- Diagnostic Procedure For the Bus Wiring Harness
- Checking Control Modules Allow Diagnostics Communication
- Diagnostic Procedure For the Control Module's Current Supply
- Final Check
- Before Changing A Control Module
- The Diagnostic Tools Display Shows "Missing"
- The Diagnostic Tools Screen Does Not Go With the ON Button
Locations- Connector Locations
- Control Module, ACC
- Control Module, SRS/Airbag
- Main Unit, Audio Systems
- CD Changer
- Control Module, Electrically Adjustable Seat With Memory
- Control Module, Trionic T5
- Control Module, Trionic T7
- Control Module, TCM
- Monotronic 2.10.3 Control Module
- Main Instrument Display
- SID
- Control Module, ABS
- Control Module, STC
- Control Module, Trionic T5 OBDII
- Control Module, DICE LHD
- Control Module, TWICE
- H10 - 21
- H16 - 1
- H16 - 4
- H29 - 1
- H29 - 2
- H33 - 1
- H33 - 2
- H33 - 4 LHD
- H33 - 5 LHD
- H33 - 5 RHD
- Ground Locations
- Splice Locations
- Crimp J41, Engine Harness
- Crimp J42, Engine Harness
- Crimp J47, Instrument Harness
- Crimp J48, Instrument Harness
- Crimp J69, Instrument Harness
- Crimp J72, Instrument Harness
- Crimp J79, Engine Wiring Harness
- Crimp J82, Instrument Harness
- Crimp J83, Instrument Harness
- Crimp J84, Instrument Harness
- Crimp J85, Instrument Harness
- Crimp J89, Instrument Harness
- Crimp J90, Instrument Harness
- Crimp J96, Instrument Harness
- Crimp J97, Instrument Harness
- Crimp J98, Instrument Harness
- Crimp J99, Instrument Harness
- Crimp J100, Engine Wiring Harness
- Crimp J129, Rear Harness
- Crimp J130, Rear Harness
- Crimp J131, Rear Harness
- Crimp J132, Rear Harness
- Crimp J152, Rear Harness
- Crimp J153, Rear Harness
- Connector Locations
Diagrams
Tools and Equipment