Instrument Panel Electrical Center 22 (IPEC)

Instrument panel electrical center 22 (IPEC)

Location
The electrical center is located in the short left hand side of the dashboard.

Main task
The electrical center for most of the operations in the compartment and dashboard.

BCM control module 707 is located in the electrical center

Type
Electrical center with relays, maxi and micro-fuses.

Connect
The 16 pin connector from the BCM 707 control module is connected directly to the electrical center.

The electrical center is fed with +30 voltage from the engine bay electrical center 342 and is connected to the dashboard harness via a 42 pin connector.

�;�1:

The following current circuits are distributed by the electrical center:
1. Power supply +30, dashboard's electrical center
2. Power supply +15, dashboard's electrical center
3. Power supply +54, dashboard electrical center





The electrical center can contain a greater number of fuses than those listed below. In such cases, these are not connected to a wiring harness.











Relays





The electrical center can contain a greater number of relays than those listed below. In such cases, these are not connected to a wiring harness.