Front Direction Indicators

Front Direction Indicators

To remove
1. Open the bonnet.
2. Remove the bulb:
^ LH: Remove the washer fluid filler pipe (A).





^ RH: Remove the protective cover of the xenon/halogen lamp.
^ Turn the bulb socket (B) anticlockwise and lift out the socket.





^ Not US/CA: Remove the bulb from the socket by turning it anticlockwise.
^ US/CA: Remove the bulb (C) from the socket by carefully prying aside the lock lugs on the short sides of the fitting.





To fit

IMPORTANT: When changing a bulb, select a new bulb of the correct rating to prevent the components being damaged.

1. Fit the bulb:
^ US/CA: Fit the bulb into the socket by pressing it into the fitting. Make sure that the lock lugs engage.
^ Not US/CA: Fit the bulb in the socket by turning it clockwise.
^ Fit the bulb socket to the headlamp by turning it clockwise.
^ LH: Fit the washer fluid filler pipe.
^ RH: Fit the protective cover of the xenon/halogen lamp.
2. Close the bonnet.