Seal (Stuffing Box), Driver In Differential Clutch
Seal (stuffing box), driver in differential clutchTo remove
1. Remove the Propeller shaft.
2. Remove the driver (A), use a puller.
3. Remove the seal (A), use a screwdriver.
To fit
1. Fit the seal (A), use DT-49065 Fitting drift.
2. Fit the driver (A). Use DT-49048 Support.
Tightening torque 100 ± 5 Nm (73.8 ± 3.7 ft. lbs.)
3. Check the fluid level in accordance with Checking/changing fluid in the differential clutch.
4. Fit the Propeller shaft.