B1235

B1235

Luggage Compartment Lighting







Fault symptoms

Luggage compartment lighting not working.

Condition

The output is overload protected and is cut if the load is too high. A DTC is generated if this occurs.
DTCs are not generated if the voltage is below 11 V or during diagnostic communication.

Diagnostic help

The output from the control module can be activated with the diagnostic tool.
Make sure the bulbs are of the correct rating.
If a lamp with too high a rating is fitted, diagnostic trouble code B1235 can be generated.
The overload protection is reset by turning the ignition OFF and then ON.

IMPORTANT: The DICE control module can be damaged if a bulb with incorrect rating is fitted.

Fault Diagnosis Procedure