C0131
C0131Pressure sensor failure
Fault symptoms
TC/ESP OFF on
ABS lamp on
ABS, TCS or ESP inoperative
Conditions
The signal from the pressure sensor exceeds 4.75 V or is less than 0.25 V for 0.1 s.
The power supply to the pressure sensor exceeds 5.6 V or is less than 4.4 V for 0.06 s.
Faulty signal from pressure sensor
Diagnostic help
Before conducting fault diagnosis of the pressure sensor, the circuit for the brake light switch must first be checked. See Brake lights.
A pressure reading can be taken using the diagnostic tool. The value should be 0 when the pump is at rest and the brake pedal fully released.
Fault Diagnosis Procedure