User Programming

User Programming







The ACC control module can be user programmed so that certain automatic control functions are changed. The selections are saved so that the control module selects them until they have been deprogrammed. Both programming and deprogramming are performed by pressing the button for electrically heated rear window or electrically heated front seat for more than 2 seconds. I both cases the selection is acknowledged by a sound from SID and a text that is shown on the main instrument unit display for 5 seconds.

ACC: AUTO:DEFR REAR WINDOW
ACC: MANUELL DEFR REAR WINDOW
ACC: AUTO SEAT HEATING
ACC: MANUAL SEAT HEATING

The different extended functions are explained below:

Heated front seat
In automatic function the ACC will decide whether it needs to heat the seat, for how long and at what temperature. The button for electrically heated front seat symbolises different temperature levels. In automatic function heat level 1 will be selected.

Adjustment
Adjusting heated seat offset temperature with the diagnostic tool.

Electrically heated rear window with rear-view mirrors
In automatic function the ACC will decide when the rear window and door mirrors need to be heated. The time depends on the outside temperature and the temperature in the cabin. The LED in the button comes on and confirms that the electrically heated rear window is on.