Horn Switch: Service and Repair

Horn Button







To remove

WARNING: Carefully read all the safety instructions before working on the airbag.

1. Remove the airbag.
2. Remove the four horn plate retaining screws and lift up the whole unit.

IMPORTANT: Retain the springs. They are not included in the spare part kit.

To fit







1. Fit the old springs to the new horn button.
2. Place the horn plate on the horn button.







3. Fit the horn plate.
Tightening torque 8 ±1 Nm (5.86 ±0.73 lbf ft)
4. Fit the airbag.