Horn: Service and Repair

Horn

Removal

1. Remove the upper plastic clip.







2. Remove the screws from the wing liner.







3. Free the bumper shell by freeing the hook with a screwdriver. Bend the shell forwards and place a support under so that it is not damaged.
4. Unplug the connector.







5. Remove the horn retaining nut.

Refitting

1. Check that the horn has the correct tone. The high-tone horn is marked H and the low-tone L.
2. Fit the horn at a 15-20� angle downwards/outwards.







3. Plug in the connector.
4. Position the bumper shell correctly.
5. Fit the upper plastic clip.







6. Fit the wing liner bolts.