Shift Solenoid: Service and Repair

Solenoids

To remove

Important
Solenoids SLT, SLS and SLU that control the system pressure and Lock-up must not be dismantled!

1. Remove the valve housing cover.
2. Unplug the relevant solenoid's connector.





3. Remove the solenoid's retaining bolt.
4. pry the solenoid loose, using a screwdriver.

Fitting
1. Position the solenoid and tighten the bolt.

Tightening torque: 7 Nm (5 lbf ft).





2. Plug in the solenoid's connector.
3. Fit the valve housing cove.