Rear Suspension

Anti-roll bar

To remove





1. Raise the car and remove the rear wheels.
2. Remove the anti-roll bar retaining nuts and bolts.
3. Remove the anti-roll bar.

To fit





1. If necessary, lubricate the anti-roll bar bushes with Molycote 33 (bushes on new anti-roll bars are already lubricated), position the anti-roll bar and fit all the bolts and nuts.
2. Tighten the nuts and bolts.

Tightening torque 50 Nm (40 lbf ft)

3. Fit the wheels, see Wheels.

Tightening torques

aluminum rim 110 Nm (81 lbf ft)

pressed steel rim 50 Nm +2x90 degrees, max. 110 Nm (37 lbf ft +2x90 degrees, max. 81 lbf ft)

4. Lower the car to the floor.