Wheelhouse Panel Replacement (Rear End)

Wheelhouse Panel Replacement (Rear End)


Removal Procedure





1.Remove the bolt that retains the wheelhouse panel to the rocker panel molding.

2.Remove the screws that retain the wheelhouse panel to the rear fascia.

3.Remove the push-pins retaining the wheelhouse panel to the wheelhouse.

4.Remove the wheelhouse panel from the vehicle.

Installation Procedure





1.Install the wheelhouse panel to the vehicle.

2.Install the push-pins retaining the panel to the wheelhouse.

Caution:Refer to Fastener Caution .

3.Install the screws that retain the wheelhouse panel to the rear fascia and tighten to2 N �m (18 lb in).

4.Install the bolt that retains the wheelhouse panel to the rocker panel molding and tighten to7 N �m (62 lb in).