Driver or Passenger Seat Adjuster Switch Bezel Replacement

Driver or Passenger Seat Adjuster Switch Bezel Replacement

Removal Procedure




1. Remove the 3 screws that retain the switch bezel to the seat.




2. Partially remove the switch bezel from the seat.
3. Remove the seat switches from the switch bezel by releasing the retaining tabs Refer to Power Seat Switch Replacement (Power Seat Switch Replacement).
4. Remove the lumbar switch from the switch bezel by releasing the retaining tabs. Refer to Front Seat Lumbar Control Switch Replacement (Front Seat Lumbar Control Switch Replacement).
5. Remove the switch bezel from the seat.

Installation Procedure




1. Install the lumbar switch to the switch bezel, verifying that the retaining tabs are fully seated. Refer to Front Seat Lumbar Control Switch Replacement (Front Seat Lumbar Control Switch Replacement).
2. Install the seat switches to the switch bezel, verifying that the retaining tabs are fully seated. Refer to Power Seat Switch Replacement (Power Seat Switch Replacement).





Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the switch bezel to the seat with the 3 screws and tighten to 3 Nm (26 in. lbs.)