Operation CHARM: Car repair manuals for everyone.
Home >> Saab >> 2009 >> 9-7X L6-4.2L >> Repair and Diagnosis >> Engine, Cooling and Exhaust >> Engine >> Service and Repair >> Overhaul >> Assembly >> Crankshaft Balancer Installation

Crankshaft Balancer Installation




Crankshaft Balancer Installation

Special Tools
* EN-48034 - Crankshaft Balancer Installer
* J 45059 - Angle Meter




1. Install the crankshaft balancer using EN-48034 - installer.
2. Remove EN-48034 - installer.
3. Hold the flywheel or back of the crankshaft. The crankshaft balancer does not have a keyway so the crankshaft could turn when tightening, causing an improper torque.





Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the crankshaft balancer washer and new bolt.

1. Tighten the new crankshaft balancer bolt while holding the back to 150 Nm (110 ft. lbs.).
2. Use J 45059 - meter to tighten the crankshaft balancer bolt an additional 180 degrees.

pro multis · About Operation CHARM