Mode Door Replacement

Mode Door Replacement

Removal Procedure

1. Remove the instrument panel (I/P) carrier. Refer to Instrument Panel Carrier Replacement (Instrument Panel Carrier Replacement).
2. Remove the screws from the mode actuator.
3. Remove the mode actuator.




4. Remove screws in order to separate the defroster/mode outlet cover (2) from the HVAC module assembly (1).




5. Remove the mode door (1) from the heater module.

Installation Procedure




1. Install the mode door (1) to the HVAC module assembly.
2. Install the defroster/mode outlet cover.




3. Install the defroster/mode outlet cover screws to the HVAC module assembly (1).

Caution: Refer to Fastener Caution (Fastener Caution).

4. Install the screws to assemble the defroster/mode outlet to the HVAC module assembly and tighten to 1.9 Nm (18 in. lbs.).
5. Install the mode actuator.
6. Install the screws to the mode actuator and tighten to 1.9 Nm (18 in. lbs.).
7. Install the I/P carrier. Refer to Instrument Panel Carrier Replacement (Instrument Panel Carrier Replacement).