Oil Pressure Sensor: Service and Repair

Engine Oil Pressure Sensor and/or Switch Replacement

Removal Procedure

1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the engine shield. Refer to Engine Protection Shield Replacement (Engine Protection Shield Replacement).




3. Remove the electrical connector from the oil pressure switch.
4. Remove the oil pressure switch.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the oil pressure switch and tighten to 20 Nm (15 ft. lbs.).
2. Install the electrical connector to the oil pressure switch.
3. Install the engine shield. Refer to Engine Protection Shield Replacement (Engine Protection Shield Replacement).
4. Lower the vehicle.