Transmission Mount Replacement

Transmission Mount Replacement (4.2L)

Removal Procedure




1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Support the transmission with a suitable jack.
3. Remove the nuts securing the transmission mount to the transmission support.




4. Remove the transmission support from the vehicle. Refer to Transmission Support Replacement (Transmission Support Replacement).




5. Remove the transmission mount bolts (1, 2).




6. Remove the transmission mount to the exhaust hanger mounting bolt.
7. Separate the transmission mount from the exhaust hanger.
8. Remove the transmission mount.

Installation Procedure




1. Install the transmission mount to the exhaust hanger bracket.

Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the bolt that secures the transmission mount to the exhaust hanger bracket and tighten to 30 Nm (22 ft. lbs.).




3. Install the transmission mount.
4. Install the bolts (1, 2) securing the transmission mount to the transmission and tighten to 65 Nm (48 ft. lbs.).




5. Install the transmission support to the vehicle. Refer to Transmission Support Replacement (Transmission Support Replacement).




6. Remove the transmission jack.
7. Install the nuts securing the transmission mount to the transmission support and tighten to 46 Nm (35 ft. lbs.).
8. Lower the vehicle.