Rear Steering Gear Crossmember Replacement

Rear Steering Gear Crossmember Replacement


Removal Procedure





1.Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .

2.Remove the front steering gear crossmember rear mounting bolts.

3.Remove the rear steering gear crossmember mounting bolts.

4.Remove the rear steering gear crossmember from the vehicle.

Installation Procedure





1.Install the rear steering gear crossmember to the vehicle.

Caution:Refer to Fastener Caution .

2.Install the rear steering gear crossmember mounting bolts and tighten to50 N �m (37 lb ft).

3.Install the front steering gear crossmember rear mounting bolts and tighten to50 N �m (37 lb ft).

4.Lower the vehicle.