Transfer Case Shield Replacement

Transfer Case Shield Replacement


Removal Procedure





1.Raise the vehicle. Refer to Lifting and Jacking the Vehicle .

2.Remove the transfer case shield mounting bolts (3) from the transmission support.

3.Remove the transfer case shield (2) from transmission support.

Installation Procedure





1.Install the transfer case shield (2) to the transmission support. Ensure that the J-nuts (1) are in place.

Caution:Refer to Fastener Caution .

2.Install the transfer case shield mounting bolts (3) and tighten to16 N �m (12 lb ft).

3.Lower the vehicle. Refer to Lifting and Jacking the Vehicle .