Body Side Window Rear Garnish Molding Replacement

Body Side Window Rear Garnish Molding Replacement

Removal Procedure




1. Remove the bolt that retains the seat belt upper anchor to the body.
2. Remove the garnish molding from the vehicle.

Installation Procedure




1. Install the garnish molding to the vehicle.
2. Install the seat belt retractor to the body.

Caution: Refer to Fastener Caution (Fastener Caution).

3. Install the bolt that retains the seat belt anchor to the body and tighten the anchor bolt to 70 Nm (52 ft. lbs.).