Driver or Passenger Seat Back Cushion Finish Panel Replacement

Driver or Passenger Seat Back Cushion Finish Panel Replacement

Removal Procedure




1. Remove the front bucket seat assembly from the vehicle. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).
2. Remove the front seat back cover and pad. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement (Driver or Passenger Seat Back Cushion Cover and Pad Replacement).
3. Remove the lumbar cables from the panel clips.




4. Remove the 2 push-pin fasteners (1) from each side of the panel.




5. Remove the push-pin fastener (1) from the bottom of the panel.




6. Remove the panel from the top of the seat-back frame.
7. Remove the seat-back frame.

Installation Procedure




1. Install the seat back over the top of the seat-back frame.




2. Install the panel to the seat-back frame with 2 push-pin fasteners (1) to each side of the panel.




3. Install the push-pin fastener (1) to the bottom of the panel.




4. Install the lumbar cables to the panel clips.
5. Install the front seat back cover and pad. Refer to Driver or Passenger Seat Back Cushion Cover and Pad Replacement (Driver or Passenger Seat Back Cushion Cover and Pad Replacement).
6. Install the front bucket seat assembly to the vehicle. Refer to Front Seat Replacement - Bucket (Front Seat Replacement - Bucket).