Dome Lamp Override Switch Replacement

Dome Lamp Override Switch Replacement

Removal Procedure

1. Remove the instrument panel (I/P) cluster trim panel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement (Instrument Panel Cluster Trim Plate Bezel Replacement).




2. Disconnect the electrical connector.
3. Remove the dome lamp over ride switch.

Installation Procedure




1. Install the dome lamp over ride to the cluster trim panel.
2. Connect the electrical connector.
3. Install the I/P cluster trim panel. Refer to Instrument Panel Cluster Trim Plate Bezel Replacement (Instrument Panel Cluster Trim Plate Bezel Replacement).