Ignition Coil: Service and Repair

Ignition Coil Replacement

Removal Procedure




1. Remove the spark plug wire from the ignition coil.




2. Disconnect the ignition coil electrical connector.




3. Remove the ignition coil bolts.




4. Remove the ignition coil.

Installation Procedure




1. Install the ignition coil.





Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the ignition coil bolts and tighten to8 Nm (71 in. lbs.).




3. Connect the ignition coil electrical connector.




4. Connect the spark plug wire to the ignition coil.