Transfer Case Front Output Shaft Speed Sensor Replacement
Transfer Case Front Output Shaft Speed Sensor Replacement
Removal Procedure
1. Raise the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).
2. Remove the transfer case front speed sensor electrical connector.
3. Remove the transfer case front speed sensor.
Installation Procedure
Caution: Refer to Fastener Caution (Fastener Caution).
1. Install the transfer case front speed sensor and tighten to 17 Nm (13 ft. lbs.).
2. Install the transfer case front speed sensor electrical connector.
3. Lower the vehicle. Refer to Lifting and Jacking the Vehicle (Service and Repair).